Kart Parts There are 197 products.
Nassa Panel Top Brackets 2 off A pair
Cheetah Crank Shaft Nut
17 mm nut, 2 per Cheetah engine 1 for the clutch drum, 1 for the flywheel. A small dot of thread glue is recommended during replacement
chassis plug 30mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
Clutch Drum and 10 Tooth Sprocket suit IAME X30 KA100...
Clutch Drum suit IAME X30 , KA100 , RL Leopard or Cheetah 10 Tooth 4 bolt sprocket
X30 Exhaust Header IAME Part No.: X30125365
X30 Exhaust Header IAME Part No.: X30125365 Item No. on Diagram : 402 To Suit : X30 EXHAU
Stainless Exhaust Spacer To Suit Yamaha High...
Engine Mount
Engine Mount to suit 32mm frame PLEASE NOTE: Requires Engine Mount NUT to be inserted in the mount see below
Rear Crash Bar Mounting Bolt Short
Stub Axle Bearing Spacer 10mm ID x 26.5mm Long
Stub Axle Bearing Spacer 8mm ID x 26.5 mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Floor Tray Rubber Washer M6 - Black
Bead Locks Kartelli Corse thumb tightening set of 3
Set of 3 Kartelli Corse thumb bead locks easy to tighten, thumbtightening beadlocks. Suitable for Douglas, OTK, Kartelli Corse and most quality brand rims
Air Box Internal Filter RED NOTE: NOT IAME BRANDED
Internal air filter and rubber RED type Cheetah and X30 if your not racing AKA