Carburettor Cable Clamp

This clamps the end of the throttle cable to the butterfly shaft arm on the carburettor     A good spare part to carry

Stub Axle Bearing Spacer 10mm ID x 22mm Long

Stub Axle Bearing Spacer 8mm ID x 23mm Long   This is the spacer that goes between the top and bottom bearings in stub axle spindles

Bead Locks set of 12 medium

If the big bead lock are TOO BIG .. And the small are to fiddly .. Then these are the ones your after   GO KART SMALL BEAD LOCKS

Engine Tensioner Bolt M10 x 100mm

Engine Tensioner Bolt   M10 x 100mm   Bolt ONLY

chassis plug 30mm

Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back  UNDER THE axle)  For when neatness counts

Stub Axle Bearing Spacer 10mm ID x 26.5mm Long

Stub Axle Bearing Spacer 8mm ID x 26.5 mm Long   This is the spacer that goes between the top and bottom bearings in stub axle spindles

Washer Counter Sunk Alloy Black Anodised M6 ( Small )

Washer Counter Sunk Alloy Black Anodised Small. Used for floor mounting kits.

Seat Washer M8 Counter Sunk Alloy Black Anodised

Seat Washer Counter Sunk Alloy Black Anodised

chassis plug 32mm

Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts

Stub Axle Bearing Spacer 8mm ID x 23mm Long

Stub Axle Bearing Spacer 8mm ID x 23mm Long   This is the spacer that goes between the top and bottom bearings in stub axle spindles

Washer Counter Sunk Alloy Gold Anodised M6 ( Small )

Washer Counter Sunk Alloy Gold Anodised Small used for floor tray mounting

Wheel Nuts tubular Pack of 12