Brake Rod Clevis and Pin Standard Right Hand Thread M6 x 24mm - SHORT
brkrodclevisclips
$12.95
Tax included
The Clevis and Clip Pin for the end of the brake rod to attach to the Brake Master Cylinder.
M6 Standard Right Hand Thread
M6 x length 24mm
16 other products in the same category:
Rotax Tool For Fitting Sprocket To Rotax Part No.: 277364
$68.40
Tax included
Brake Pad to suit Rigetti Ridolphi 2 and 4 spot brakes...
Brake Pad to suit Rigetti Ridolphi 2 and 4 spot brakes As fitted from NEW SET OF 2 PADS Part No. K183R
$59.95
Tax included
25mm Stub Bearing 6000zz 4 pak OD 26mm x ID 10mm x 8mm
25mm Stub Bearing 4 pak Model: 6000zz OD 26mm x ID 10mm x 8mm
$27.50
Tax included
Rotax Piston and Ring 53.92 Rotax Part No.: 295509
Rotax Piston and Ring 53.99 Yellow Second Oversize Rotax Part No.: 296296
$205.95
Tax included
Bearing Hanger Gold 50mm Axles suit OD 80mm bearings
$59.95
Tax included
Spark Plug NGK BPR8EIX Iridium Race Plug
Spark Plug NGK 8 EIX IRIDIUM Competition Grade Spark Plug Suits Racing gives you the edge
$29.80
Tax included
MAXXIS DIRT T-18 REAR TYRE 11.5X8.00-6 - Soft Compound
$178.95
Tax included
OTK M7 Nassa Panel Kit - Green
$379.95
Tax included
Front Tyre MG Red 10 x 4.50-5
Front MG Red Tyre. Good all round tyre AKA controlled tyre for many Classes. Great with restricted 125cc
$67.49
Tax included
King Pin Bolt 10mm
King pin bolt 10mm. A specially machined hightensile bolt to give a perfect 9.95mm shaft to prevent any play in the stub axle bearings.
$8.00
Tax included
Brake Disc Carrier 50mm Star Gold
Brake Disc Carrier 50mm Star Gold / Magnesium colour 8mm Keyway. Light weight
$94.95
Tax included
ROTAX MAIN JET KIT 115-118-120-122- 125-128-130
ROTAX MAIN JET KIT 115-118-120-122- 125-128-130 Kit of 7 Jets Rotax Main Jets Kit - 7 JETS Get the exact tune you need for full engine power
$44.95
Tax included
Brake Distribution Brake Bias Brake Balance for front...
$119.95
Tax included
Spark Plug Cap Lock - Safety Ring for Large Spark Plug...
Spark Plug Cap NGK TB05EMH Black
$14.95
Tax included
The Clevis and Clip Pin for the end of the brake rod to attach to the Brake Master Cylinder.
M6 Standard Right Hand Thread
M6 x length 24mm