IAME KA100 CLUTCH HUB KIT GENUINE X30125841 and IAI-30000 with nut and bolts
engiameclutchkakit
$489.95
Tax included
Go Kart IAME X30 Clutch Hub Kit
NOT X30 ( has different ring gear / start wheel Z70 )
IAI-30000 Z68
X30125841
CLUTCH HUB
RING GEAR
LHT NUT KIT
Genuine Original Part
THIS HUB THE HOLDING BOLTS ARE
MOUNTED FROM OUTSIDE OF THE HUB
Clean the crankshaft with very fine wet
or dry paper to ensure there is
zero residue from the previous locking solution.
Hold the crankshaft securely with a piston
stop tool before you tension all the locking bolts.
After tightening the new clutch
hub runs true to crankshaft centre line.
Also Sold it the clutch puller tool
Genuine Original Part
NOTE: 3 M6 Bolts from the FRONT not REAR
IAME Part No.: X30125841 IAI-30000
If your after the Clutch hub puller we also sell that tool
Clutch Puller IAME KA 100 and X30 after 2015
$69.95
Tax included
IAME X30 CLUTCH HUB KIT GENUINE X30125841 and...
$489.95
Tax included
16 other products in the same category:
Fuel Tank Adaptor
$8.95
Tax included
Nassa Panel Top Brackets 2 off A pair
$38.95
Tax included
Side Pod Right Black KG KG 502 Black STILO sidepod
$136.95
Tax included
Rotax 13 Tooth Sprocket Part Number 236872
Rotax 12 Tooth Sprocket Part Number 236872
$58.15
Tax included
Starter Motor GENUINE ROTAX Suit all rotax engines...
$342.95
Tax included
Digital Hour Meter Kartelli NOT CHEAP Just The Best
$57.95
Tax included
GO KART ENGINE SPROCKET TO SUIT RL LE0PARD 10 TOOTH 3...
$44.95
Tax included
MiniRok Vortex Mini Rok Piston 41.88 mm
$153.35
Tax included
Front Tyre MG White SW2 CIK FIA 2024 Wets - MG Tyre...
$68.70
Tax included
Rotax Compatible 11 Tooth Sprocket, Locator Pin,...
Rotax 11 Tooth Sprocket, Locator Pinand insert bush Bush part number 233855 When using the 11 tooth sprocket on a Rotax engine
$49.95
Tax included
Bearing 40mm x 80mm zz
$23.95
Tax included
Aim Mychron Sensors CHT Sensor - Long
$149.95
Tax included
The Brake Clevis Clevis Clip Red M6 Right Hand Thread...
$16.95
Tax included
Go Kart IAME X30 Clutch Hub Kit
NOT X30 ( has different ring gear / start wheel Z70 )
IAI-30000 Z68
X30125841
CLUTCH HUB
RING GEAR
LHT NUT KIT
Genuine Original Part
THIS HUB THE HOLDING BOLTS ARE
MOUNTED FROM OUTSIDE OF THE HUB
Clean the crankshaft with very fine wet
or dry paper to ensure there is
zero residue from the previous locking solution.
Hold the crankshaft securely with a piston
stop tool before you tension all the locking bolts.
After tightening the new clutch
hub runs true to crankshaft centre line.
Also Sold it the clutch puller tool
Genuine Original Part
NOTE: 3 M6 Bolts from the FRONT not REAR
IAME Part No.: X30125841 IAI-30000
If your after the Clutch hub puller we also sell that tool