IAME X30 CLUTCH HUB KIT GENUINE X30125841 and X30125831 latest model
engiameclutchx30kit
$489.95
Tax included
Go Kart IAME Clutch Hub Kit
NOT KA100 ( has different ring gear / start wheel Z68 )
LASTEST MODEL X30 CLUTCH KIT
X30125831 Z70
X30125841
X30125841-KIT
CLUTCH HUB
RING GEAR
LHT NUT KIT
Genuine Original Part
CAN BE USED TO UPDATE EARLY X30
CLUTCH CONVERSION UPDATE KIT
THIS HUB THE HOLDING BOLTS ARE
MOUNTED FROM OUTSIDE OF THE HUB
The only clutch hub assembly made for
X30 late model engines from 2013 TO 2015 (early model )
Clean the crankshaft with very fine wet
or dry paper to ensure there is
zero residue from the previous locking solution.
Hold the crankshaft securely with a piston
stop tool before you tension all the locking bolts.
After tightening the new clutch
hub runs true to crankshaft centre line.
Also Sold it the clutch puller tool
IAME X30 Clutch Go Kart Clutch Shoe Hub
Genuine Original Part
NOTE: 3 M6 Bolts from the FRONT not REAR
IAME Part No.: X30125841
The OLD MODEL pre 2015 bolts on from the rear and is discontinued
If your after the Clutch hub puller we also sell that tool
Clutch Puller IAME KA 100 and X30 after 2015
$69.95
Tax included
IAME KA100 CLUTCH HUB KIT GENUINE X30125841 and...
$489.95
Tax included
16 other products in the same category:
Aim Mychron Sensors Front Kart speed sensor
MyChron Front speed sensor with magnet. Connects to MyChron Expansion. The kart speed sensor allows you to measure your kart’s front wheel speed. This sensor is a "non...
$179.95
Tax included
European Alloy Pedal Extensions. Suit bar type pedals....
$44.00
Tax included
Side Pod Bar Suit most Karts - Left 500mm Centres 20mm...
$110.00
Tax included
Brake Rod Clevis and Pin Standard Right Hand Thread M6...
$12.95
Tax included
ROTAX 125 MAX DD2 ENGINE
$6,295.00
Tax included
OTK Brake Pad - BSS Front/EV Rear - EV0100.G2 - Set of 2
$104.95
Tax included
X30 Tryton 27mm Carburetor IAME Part No.: 10948A
$215.00
Tax included
Replacement Nylon Slider
$29.95
Tax included
Rotax Airbox Case Top Rotax Part No.: 225025
Rotax Airbox Case - Top - 2007 Type Rotax Part No.: 225025
$39.95
Tax included
Kart Axle 50mm 1000mm OTK Compatible - 8mm 2 Peg...
$229.95
Tax included
Starter External Starter Kartelli -Drive Shaft Only -...
$34.95
Tax included
Aim MyChron5 Accessories MyChron5 Steering Wheel 6...
MyChron5 Steering Wheel 6 hole Black suitable for OTK Karts. MyChron5 Steering Wheel is the ideal complement for your newest MyChron5. Light-weighted and ergonomical, it allows you to...
$359.95
Tax included
DID Oring Chain EXTRA Heavy Duty 100 to 112 Link the...
$99.95
Tax included
Accelerator Cable Inner Long Round
$11.95
Tax included
Front Nassa Panel Number Plate Sticker Yellow
Front Nassa Panel Number Plate Sticker Yellow
$7.50
Tax included
Fuel Line T connection - Plastic
Fuel Line Y connection Suit fuel line ID 5mm OD 9mm ( standard kart fuel line )
$5.95
Tax included
Go Kart IAME Clutch Hub Kit
NOT KA100 ( has different ring gear / start wheel Z68 )
LASTEST MODEL X30 CLUTCH KIT
X30125831 Z70
X30125841
X30125841-KIT
CLUTCH HUB
RING GEAR
LHT NUT KIT
Genuine Original Part
CAN BE USED TO UPDATE EARLY X30
CLUTCH CONVERSION UPDATE KIT
THIS HUB THE HOLDING BOLTS ARE
MOUNTED FROM OUTSIDE OF THE HUB
The only clutch hub assembly made for
X30 late model engines from 2013 TO 2015 (early model )
Clean the crankshaft with very fine wet
or dry paper to ensure there is
zero residue from the previous locking solution.
Hold the crankshaft securely with a piston
stop tool before you tension all the locking bolts.
After tightening the new clutch
hub runs true to crankshaft centre line.
Also Sold it the clutch puller tool
IAME X30 Clutch Go Kart Clutch Shoe Hub
Genuine Original Part
NOTE: 3 M6 Bolts from the FRONT not REAR
IAME Part No.: X30125841
The OLD MODEL pre 2015 bolts on from the rear and is discontinued
If your after the Clutch hub puller we also sell that tool