Kart Parts There are 88 products.
Brake Rod Clevis and Pin Standard Right Hand Thread M6...
Engine Mount Bolt M10 x 50mm
Stub Axle Bearing Spacer 10mm ID x 26.5mm Long
Stub Axle Bearing Spacer 8mm ID x 26.5 mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Bead Locks Kartelli Corse thumb tightening set of 12
Chain Guard Mounting Bracket - long
The Brake Clevis Clevis Clip Red M6 Right Hand Thread
Red Anodised Clevis and Clip Pin for the end of the brake rod to attach to the Brake Master Cylinder. M6 Right Hand Thread M6 Standard Right Hand Thread
Plastic Spacer Washer M6
Plastic Spacer Washer M6 Normally used on front crash bars as a bush.
Stub Axle Bearing Spacer 8mm ID x 23mm Long
Stub Axle Bearing Spacer 8mm ID x 23mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Bead Locks set of 12 medium
Brake Rod Clevis Pin 6mm
The Clevis Pin for the end of the brake rod to attach to the Brake Master Cylinder. 6mm
Engine Mount OTK Magnesium 92 x 30 mm EV0038.D0F
Engine Mount OTK Magnesium Inclined 92 x 30 mm OTK Part No. EV0038.D0F Inclined Suit Rotax , IAME, Vortex e