Kart Parts There are 218 products.
Nassa Panel Top Brackets 2 off A pair
Cable Clamp Flat 2 Screw
Clutch Springs NORAM Black RPM Approx 3200 RPM GE20
Set of 2 Noram Clutch Springs Black RPM Approx 3200 RPM
Reed Block
Alloy Cheetah Engine Reed Block. Also suits PRD Fireball and IAME RL Leopard (not X30).
X30 / KA100 clutch needle roller bearing IAME Part No...
IAME X30 IAME RL LEOPARD IGNITION SWITCH KEY X30125936-C
IAME ORIGINAL RACING REED PETALS KA100 X30 Part no...
X30 Gear Box Cover X30 Ignition support Cover IAME...
X30 Gear Box Cover X30 Ignition support Cover NOTE: Does NOT come with seal or O-RING IAME Part No.: X30125875A &nb
Stub Axle Bearing Spacer 8mm ID x 23mm Long
Stub Axle Bearing Spacer 8mm ID x 23mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Blanking Plug For Temperature Sensor Hole
Blanking Plug for temperature sensor hole with copper washer thread M10 x 1 ( standard fitting )
Bead Locks Kartelli Corse thumb tightening set of 3
Set of 3 Kartelli Corse thumb bead locks easy to tighten, thumbtightening beadlocks. Suitable for Douglas, OTK, Kartelli Corse and most quality brand rims
