Kart Parts There are 85 products.
Brake Rod Clevis and Pin M6 Standard Right Hand Thread
Fuel Pump Suit 4 stroke and 2 stroke
7 Tooth 219 Pitch Sprocket to suit Honda GX35
Washer Counter Sunk Alloy Black Anodised M8 ( Large )
Washer Counter Sunk Alloy Black Anodised Large. Used for rear bearing hangers.
Extended Wheel Nut With Flange 8mm
The Brake Clevis Clevis Clip Red M6 Right Hand Thread
Red Anodised Clevis and Clip Pin for the end of the brake rod to attach to the Brake Master Cylinder. M6 Right Hand Thread M6 Standard Right Hand Thread
Ride Spacer Washers 3 Pack M8 4mm thick
Ride Height Spacers M8 4mm thick Install on either side of the stub axle on the king pin bolt pack of 3
Stub Axle Bearing Spacer 10mm ID x 17.9 mm Long
Stub Axle Bearing Spacer 8mm ID x 17.9 mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Washer Counter Sunk Alloy Gold Anodised M8 ( Large )
Washer Counter Sunk Alloy Gold Anodised Large. Used for rear bearing hangers
WHEEL RIM TYRE VALVE
WHEEL RIM TYRE VALVE with CAP TO SUIT MAGNESIUM AND ALLOY
Brake Rod Clevis Pin 6mm
The Clevis Pin for the end of the brake rod to attach to the Brake Master Cylinder. 6mm
Fuel Line T connection
Fuel Line Y connection Suit fuel line ID 5mm OD 9mm ( standard kart fuel line )