Kart Parts There are 165 products.
Nassa Panel Top Brackets 2 off A pair
Cheetah Crank Shaft Nut
17 mm nut, 2 per Cheetah engine 1 for the clutch drum, 1 for the flywheel. A small dot of thread glue is recommended during replacement
chassis plug 30mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
Clutch Drum and 10 Tooth Sprocket suit IAME X30 KA100...
Clutch Drum suit IAME X30 , KA100 , RL Leopard or Cheetah 10 Tooth 4 bolt sprocket
Exhaust Header IAME RL Leopard or Cheetah
Exhaust Header Exhaust Header IAME RL Leopard or Cheetah Aftermarket Kartelli Corse Header
Engine Mount Torque Plate
This is a 10mm solid steel plate that you can place between the engine and the engine mount The makes the engine ROCK SOLID and reduces any crank case flex.
Restrictor Cheetah Includes 2 x Exhaust Gaskets
AKA approve and homologated Cheetah Exhaust Restrictor. This restrictor reduces the horsepower of the Cheetah to a level to race in the AKA Class of TAG/R
Bead Locks set of 3 small
Bead Locks set of 12 small
Kartelli Rain Suit Kids Sizes - Transparent - All Kid...
Air Box Internal Filter RED NOTE: NOT IAME BRANDED
Internal air filter and rubber RED type Cheetah and X30 if your not racing AKA
