Kart Parts There are 148 products.
The Brake Clevis Clevis Clip Red M6 Right Hand Thread
Red Anodised Clevis and Clip Pin for the end of the brake rod to attach to the Brake Master Cylinder. M6 Right Hand Thread M6 Standard Right Hand Thread
Engine Mount Bolt M10 x 50mm
Stub Axle Bearing Spacer 10mm ID x 22mm Long
Stub Axle Bearing Spacer 8mm ID x 23mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Wheel nut front stub axle spindle M14 nylock EACH
Wheel nut front stub axle spindle M14 nylock front wheel nut. EACH Regular replacement is recommended as nylocks wear from regular tightening
Wheel Nuts Pack of 6 with washers
Brake Rod Clevis Pin 6mm
The Clevis Pin for the end of the brake rod to attach to the Brake Master Cylinder. 6mm
Plastic Spacer Washer M6
Plastic Spacer Washer M6 Normally used on front crash bars as a bush.
Stub Axle Bearing Spacer 10mm ID x 26.5mm Long
Stub Axle Bearing Spacer 8mm ID x 26.5 mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Wheel Nuts tubular pack of 3
Engine Mount Nut each
Engine mount manifold nuts. M10 thread, the nuts are captive inside the engine mount. Sold as each.
Stub Axle Bearing Spacer 8mm ID x 23mm Long
Stub Axle Bearing Spacer 8mm ID x 23mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Washer Counter Sunk Alloy Black Anodised M8 ( Large )
Washer Counter Sunk Alloy Black Anodised Large. Used for rear bearing hangers.
