Kart Parts There are 183 products.
Air Box Internal Filter RED NOTE: NOT IAME BRANDED
Internal air filter and rubber RED type Cheetah and X30 if your not racing AKA
The Brake Clevis Clevis Clip Red M6 Right Hand Thread
Red Anodised Clevis and Clip Pin for the end of the brake rod to attach to the Brake Master Cylinder. M6 Right Hand Thread M6 Standard Right Hand Thread
Accelerator Cable Inner Short Lug
chassis plug 32mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
IAME ORIGINAL RACING REED PETALS KA100 X30 Part no...
Rotax Main Jet 160 Rotax Part No.: MJ160
Rotax Main Jet 160 Rotax Part No.: MJ160
Heel Stops plastic set of 2
Heel Stops plastic set of 2 EASY TO FIT Bolts to your floor tray 10 minutes to fit and your RACING
Pedal Back Bracket 2pc Set Pedal Extention Kit
Seat Washer M8 Counter Sunk Alloy Black Anodised -...
Seat Washer Counter Sunk Alloy Black Anodised
Bead Locks Kartelli Corse thumb tightening set of 3
Set of 3 Kartelli Corse thumb bead locks easy to tighten, thumbtightening beadlocks. Suitable for Douglas, OTK, Kartelli Corse and most quality brand rims
Axle Key 6mm 3 Peg
Brake Rod Clevis Pin 6mm
The Clevis Pin for the end of the brake rod to attach to the Brake Master Cylinder. 6mm
