Kart Parts There are 197 products.
Air Box Filter suit IAME X30 KA100NOTE: IAME LOGO KA...
Brake Rod Clevis and Pin Standard Right Hand Thread M6...
Accelerator Cable Round Braid
Kartelli Corse smooth running short accelerator cable with round lug Inner Cable 1260mm Braid Outer Cable 680mm
chassis plug 30mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
X30 Tryton 27mm Carburetor IAME Part No.: 10948A
Rotax Main Jet 160 Rotax Part No.: MJ160
Rotax Main Jet 160 Rotax Part No.: MJ160
Engine Mount 30mm x 125mm with 2 x 125mm mount clamp...
Engine Mount 30mm x 125mm with 2 x 125mm mount clamp suit older Tony Kart and Mike Wilson
Engine Mount Nut each
Engine mount manifold nuts. M10 thread, the nuts are captive inside the engine mount. Sold as each.
Stub Axle Bearing Spacer 8mm ID x 23mm Long
Stub Axle Bearing Spacer 8mm ID x 23mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Washer Counter Sunk Alloy Black Anodised M8 ( Large )
Washer Counter Sunk Alloy Black Anodised Large. Used for rear bearing hangers.
Wheel Nuts Pack of 3 7075 Ultra Light Wheel Nuts
Wheel Nuts Kartelli Corse 7075 ultra light weight wheel nuts Pack of 3