Kart Parts There are 283 products.
Cheetah Carburettor Manifold Gasket
Cheetah Carburettor Manifold Gasket BEWARE OF THE PULSE LINE HOLE
Accelerator Cable Inner Short Round
Kartelli Corse short inner cable, round end 1250 mm long
Cheetah Crank Shaft Nut
17 mm nut, 2 per Cheetah engine 1 for the clutch drum, 1 for the flywheel. A small dot of thread glue is recommended during replacement
Accelerator Cable Lug Braid Long
Carburettor Tillotson HL 334AB
Reed Block
Alloy Cheetah Engine Reed Block. Also suits PRD Fireball and IAME RL Leopard (not X30).
X30 / KA100 Manifold GASKET IAME Part No.: X30125809
X30 / KA100 Manifold GASKET IAME Part No.: X30125810 Item No. on Diagram : 170 To Suit :...
Rotax Main Jet 165 Rotax Part No.: MJ165
Rotax Main Jet 165 Rotax Part No.: MJ165
Plastic Spacer Washer M6
Plastic Spacer Washer M6 Normally used on front crash bars as a bush.
Stub Axle Bearing Spacer 10mm ID x 26.5mm Long
Stub Axle Bearing Spacer 8mm ID x 26.5 mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles