Kart Parts There are 220 products.
Brake Fitting 90 Degree Fitting Normal Type
90 Degree Fitting Normal Type NORMAL L PIECE UNION 1/8 - 6/4mm
Air Box Internal Filter RED NOTE: NOT IAME BRANDED
Internal air filter and rubber RED type Cheetah and X30 if your not racing AKA
Brake Disc OTK Compatible 206mm x 16mm Part No....
Complete Brake System suit 40mm axle
COMPLETE REAR BRAKE SYSTEM Brake Master Cylinder Brake Lines Brake Pads Brake Caliper / Self adjusting Brake Disc 195mm Floating 40mm Brake Carr
Brake Mounting Nuts 2 off
Brake Caliper Mounting Nut sold as a pair. These are special locking nuts, as they have ro lock under extreme heat and normal Nylocks are not sufficient.
BRAKE PADS SET to suit KSI Mechanical Brakes
KSI GO KART BRAKE PAD Set of 2 / PAIR Suits:
IAME Clutch Woodruff Key
Clutch Drum and 10 Tooth Sprocket suit IAME X30 KA100...
Clutch Drum suit IAME X30 , KA100 , RL Leopard or Cheetah 10 Tooth 4 bolt sprocket
Hose Fiting suit IAME RL Leopard or SQ Cheetah
Brass hose fitting with copper washer gasket, as used in the cylinder for water inlet and the thermostat cover for outlet in the head. suit IAME RL Leopard or SQ Cheetah