Kart Parts There are 270 products.
Nassa Panel Top Brackets 2 off A pair
IAME X30 and RL Leopard Gudgeon Pin
Brake Rod Clevis Pin 6mm
The Clevis Pin for the end of the brake rod to attach to the Brake Master Cylinder. 6mm
IAME Clutch Woodruff Key
Starter Motor Armature Suit TAG eng. Rotax IAME...
Starter Motor Armature SUIT TAG engines. Rotax IAME CHEETAH Rok ( except Fireball ) Even if you buy a new starter motor, rebuild your old one and keep it as a good spare. Also...
Side Pod Right Black KG
BODY WORK KIT KG NOSE SIDE PODS AND NASSA PANEL
Body work plastic kit Nose cone Nassa panel Set of side pods. Note: Doesn't include the rear bar.
Stub Axle Bearing Spacer 10mm ID x 26.5mm Long
Stub Axle Bearing Spacer 8mm ID x 26.5 mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Blanking Plug For Temperature Sensor Hole
Blanking Plug for temperature sensor hole with copper washer thread M10 x 1 ( standard fitting )
Wheel nut front stub axle spindle M14 nylock EACH
Wheel nut front stub axle spindle M14 nylock front wheel nut. EACH Regular replacement is recommended as nylocks wear from regular tightening