Kart Parts There are 143 products.
Bearing 50mm x 90 Axle Sealed. These are heavy duty...
Bearing 50mm x 90 Axle Sealed. These are heavy duty rubber lip seal bearings. Great for dirt or wet weather.
Brake Rod Clevis Pin 6mm
The Clevis Pin for the end of the brake rod to attach to the Brake Master Cylinder. 6mm
Replacement Nylon Slider
Bearing Hanger Gold Suit 40mm and 50mm Axles
Bearing Hanger Suits most Karts with 40mm and 50mm setups
Engine Mount Nut each
Engine mount manifold nuts. M10 thread, the nuts are captive inside the engine mount. Sold as each.
Stub Axle Bearing Spacer 10mm ID x 17.9 mm Long
Stub Axle Bearing Spacer 8mm ID x 17.9 mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Trolley Scissor Folding 2 wheel
Extended Wheel Nut With Flange 8mm
Brake Rod Clevis and Pin Standard Right Hand Thread M6...
Bearing 50mm Axle 90mm OD
The is a 50mm rear axle bearing Suit most karts ID ( inside diameter ) = 50 mm OD ( outside diameter )
Rose Joint M6 standard Left Hand thread Suit: Brake Rod
Rose Joint M6 standard Left Hand thread Suit: Brake Rod