Kart Parts There are 247 products.
Nassa Panel Top Brackets 2 off A pair
Axle Key 6mm 3 Peg
Bearing 30mm Axle ID 30mm OD 62mm SB206zz
Brake Rod Clevis and Pin Standard Right Hand Thread M6...
COMPLETE KIT OF OVERHAULING FOR BRAKE CALIPER suit RR...
COMPLETE KIT OF OVERHAULING FOR BRAKE CALIPER Suit RR 2 Spot / 2 pot
Brake Master Cylinder Boot BLACK
Master Cylinder Boot This is EXTREMELY Important to keep the dirt out of the master cylinder.
Brake Master Cylinder Gold
Piston in the Master Cylinder is 21mm or 7/8 inch. diameter. This Master Cylinder is a quality Italian part that could be adapted to
chassis plug 32mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
Ride Spacer Washers 3 Pack M8 4mm thick
Ride Height Spacers M8 4mm thick Install on either side of the stub axle on the king pin bolt pack of 3
European Alloy Pedal Extensions. Suit bar type pedals....
Stub Axle Bearing Spacer 10mm ID x 17.9 mm Long
Stub Axle Bearing Spacer 8mm ID x 17.9 mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles