Brake Master Cylinder Gold
brkmasterrr2g
$129.95
Tax included
Piston in the Master Cylinder is 21mm or 7/8 inch. diameter.
This Master Cylinder is a quality Italian part that could be adapted to
Piston in the Master Cylinder is 21mm or 7/8 inch. diameter.
This Master Cylinder is a quality Italian part that could be adapted to
16 other products in the same category:
Tyre set Dunlop KT12 senior wet set
$284.50
Tax included
X30 All Sizes 54.00 to 54.27 IAME Part No.: RING
$64.95
Tax included
Kart Clutch K100S Long Shaft - Red Clutch to suit Long...
$339.95
Tax included
Dent 2 spot brake shim 0.6mm
$9.95
Tax included
Rotax Main Jet 188 Rotax Part No.: MJ188
Rotax Main Jet 188 Rotax Part No.: MJ188
$5.95
Tax included
Radiator Hose Clamp
$2.95
Tax included
Front Mini Hub Set Gold Medium Suit 17mm Stub Axles
Front Mini Hub Set Medium Gold Suit 17mm stub axle
$109.95
Tax included
Carburettor Tillotson HL 334AB
$299.95
Tax included
chassis plug 30mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
$3.45
Tax included
Number 6 decal Small red sticker Suit side pods
Kart number decal red small number 6 suit side pods. Made in three layers for easy application from 3M ScotchCal. AKA approved font and size.
$0.95
Tax included
Chain Breaker 428
Chain Breaker to suit 428 Pitch Chain THIS IS USED ON SHIFTER AND HIRE KARTS.. Not the standard size kart chain which is 219 pitch
$84.95
Tax included
Camber Caster Adjusters M8 multi hole suit 22mm hole...
Camber Caster Adjusters M8 multi hole suit 22mm hole in chassis
$79.95
Tax included
10 tooth sprocket suit Vortex Mini Rok
$70.95
Tax included
C Section of Stub Axle WELD ON part Italian made 12mm
C Section of Stub Axle WELD ON part Italian made Standard 22mm holes and 54mm high
$39.95
Tax included
Piston in the Master Cylinder is 21mm or 7/8 inch. diameter.
This Master Cylinder is a quality Italian part that could be adapted to