Kart Parts There are 355 products.
Caliper Spacer Brake Shim 2mm Thick for rear brake...
ARROW X1 X2 X3 BRAKE DISC HUB BOLT SUIT FLOATER DISC
ARROW X1 X2 X3 BRAKE DISC HUB BOLT Suit Floater Disc
Brake Safety Cable
Bearing 50mm Axle 90mm OD
The is a 50mm rear axle bearing Suit most karts ID ( inside diameter ) = 50 mm OD ( outside diameter )
Brake Rod Clevis Pin 6mm
The Clevis Pin for the end of the brake rod to attach to the Brake Master Cylinder. 6mm
COMPLETE KIT OF OVERHAULING FOR BRAKE CALIPER suit RR...
COMPLETE KIT OF OVERHAULING FOR BRAKE CALIPER Suit RR 2 Spot / 2 pot
Brake Master Cylinder Boot BLACK
Master Cylinder Boot This is EXTREMELY Important to keep the dirt out of the master cylinder.
Brake Master Cylinder Gold
Piston in the Master Cylinder is 21mm or 7/8 inch. diameter. This Master Cylinder is a quality Italian part that could be adapted to
chassis plug 30mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts