Kart Parts There are 355 products.
Nassa Panel Top Brackets 2 off A pair
Axle Medium 50mm
Axle Medium 50mm x 1010mm 8mm Keyway with 2 Peg ( euro sytle ) Black Heat Treated.
Kart Axle 40mm x 1040mm - Super Soft to Super Hard -...
Axle Prodezine 40mm 1040mm Hard WHITE Standard 8mm 2 Peg Keyways - OTK Compatible ( not included ) Choosing the Flexibility
Side Pod and Nassa Panel Bolt Dome Head
These are the special BUTTON head, bolts to mount body work plastic to the mounts Suits the Nassa Panel and Side Pods
Bearing 50mm Axle 90mm OD
The is a 50mm rear axle bearing Suit most karts ID ( inside diameter ) = 50 mm OD ( outside diameter )
Brake Rod Clevis Pin 6mm
The Clevis Pin for the end of the brake rod to attach to the Brake Master Cylinder. 6mm
Carburettor Tillotson Fuel Inlet white
Brake Master Cylinder Boot BLACK
Master Cylinder Boot This is EXTREMELY Important to keep the dirt out of the master cylinder.
Brake Master Cylinder Gold
Piston in the Master Cylinder is 21mm or 7/8 inch. diameter. This Master Cylinder is a quality Italian part that could be adapted to
Accelerator Cable Inner Long Round
Kartelli Corse steel inner cable 1730 mm long, round end
