9 Tooth sprocket suit IAME X30 KA100 Genuine Z9 IAME sprocket - X30125553-C
spkfrx309gen
$139.95
Tax included
9 Tooth sprocket suit IAME X30 KA100 Genuine Z9 IAME sprocket - X30125553-C
IAME Z9 SPROCKET
NOTE : REQUIRES SPECIAL SPACER AND NUT NOT INCLUDED
A 9 TOOTH IAME X30 CLUTCH SPROCKET.
Z9 sprocket
SPROCKET 9T WITH SCREWS (NOT KA LEGAL) - KA100/X30
Great for X30 / KA100 on dirt
Can be used on RL Leopard with X30 Clucth Drum
Also will suit your KF2 CIK Clutch and the Yamaha KT100SEC Clutch
Locating Square is 23mm across flats.
These sprockets are pushing the very limits and can break if mistreated
9 Tooth sprocket suit IAME X30 KA100 Can be used on RL...
$87.90
Tax included
IAME Crank Shaft Nut and Spacer for 9T X30125573 and...
$24.95
Tax included
16 other products in the same category:
Fuel Pump Suit 4 stroke and 2 stroke
$39.95
Tax included
Battery Powered Fluid Pump 10 Litres per minute
GO KART FUEL PUMP BATTERY POWERED 10 Litres per minute Fits 32mm opening 2 x D Cells ( not included )
$39.95
Tax included
Seat XX Large Kartelli
$229.95
Tax included
Rotax Cylinder Head Water Cover Rotax Part No.: 613101
$136.95
Tax included
GO KART 7.5 LITRE FUEL TANK FITS BETWEEN STEERING...
$65.95
Tax included
Bearing 30mm Axle Sealed. These are heavy duty rubber...
Bearing 30mm Axle Sealed. These are heavy duty rubber lip seal bearings. Great for dirt or wet weather. ID = 30mm OD = 62mm SB206
$27.50
Tax included
Number 3 Black Large on Yellow background Numbers
Number 3 Black Large on Yellow background
$2.50
Tax included
Hubs Rear 30mm x 110mm Black
Hubs Rear 30mm x 110mm Black Suit 30mm Axle 8mm and 6mm keyway
$77.95
Tax included
Number 3 Decal Large Black Carbon Fibre Style Sticker
Kart Number Decal Black Large Number 3 Suit nassa panel or number plate. Easy application of Carbon Fibre Style vinyl. KA approved font and size.
$5.95
Tax included
Rear Crash Bar Mounting Bolt long
Rear Crash Bar Mounting Bolt long suit plastic rear crash bar
$4.50
Tax included
Tie Rod 275mm Black
Black Tie Rod 275 mm Suits most model and brands of karts Suits M8 left and right hand rod ends sold separately
$16.45
Tax included
ENGINESPROCKET PULLER FOR 100cc
$62.95
Tax included
Spark Plug Cap - Black
$29.95
Tax included
Body Work Kit SQ Evo Black
SQ Evo body work plastic kit nose cone, nassa panel, set of side pods.
$198.00
Tax included
9 Tooth sprocket suit IAME X30 KA100 Genuine Z9 IAME sprocket - X30125553-C
IAME Z9 SPROCKET
NOTE : REQUIRES SPECIAL SPACER AND NUT NOT INCLUDED
A 9 TOOTH IAME X30 CLUTCH SPROCKET.
Z9 sprocket
SPROCKET 9T WITH SCREWS (NOT KA LEGAL) - KA100/X30
Great for X30 / KA100 on dirt
Can be used on RL Leopard with X30 Clucth Drum
Also will suit your KF2 CIK Clutch and the Yamaha KT100SEC Clutch
Locating Square is 23mm across flats.
These sprockets are pushing the very limits and can break if mistreated