Washer - Extra thick - for engine mounts and slider mounts - M10 - 3mm thick
hwthickwasherM10
$3.50
Tax included
Washer - Extra thick - for engine mounts and slider mounts
M10
thickness 3mm
ID 10mm
16 other products in the same category:
Clutch Drum and 10 Tooth Sprocket suit IAME X30 KA100...
Clutch Drum suit IAME X30 , KA100 , RL Leopard or Cheetah 10 Tooth 4 bolt sprocket
$89.95
Tax included
chassis plug 32mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
$2.95
Tax included
Spark Plug Hole Filler Plug
Spark Plug hole filler plug For when you remove the spark plug from the engine for storage or shipping. GRAB A FEW !!!!!
$0.49
Tax included
Nassa Panel quick release mounting pin and clip set...
Nassa Panel quick release mounting pin and clip set suit ARROW X3 FP7
$8.95
Tax included
Steering Column Bush with clamp - suit 19mm
$22.95
Tax included
Magnesium Rims Front and Rear Set Bolt on front rims
$344.95
Tax included
Fully Enclosed Chain Guard extra straps
$8.95
Tax included
Number 0 Black Large on Yellow background Numbers
Number 0 Black Large on Yellow background
$2.50
Tax included
Nassa panel Black 508 Nassa Panel
$159.95
Tax included
Stub Axle Right 25mm
Stub Axle Left 25mm Suit : 10mm King Pin and Most European Karts
$209.95
Tax included
Spark Plug NGK BR8ES Standard Plug Suit Run In.
Spark Plug NGK B8ES Basic spark plug. Good for running your engine in. Suit Clubman J and a good run in plug.
$7.95
Tax included
Tillotson DG-3-HW IAME DG3HW REPAIR DIAPHRAGM KIT suit...
$24.95
Tax included
Washer - Extra thick - for engine mounts and slider mounts
M10
thickness 3mm
ID 10mm