Kerb Rider Chassis Protector
kerbriderr
$44.95
Tax included
Kerb Rider 2pc Set - Universal
Thin to apply to the lower part of the frame in strategic points in order to protect it.
The choice to make these protections of a minimum thickness is due to the desire to maintain the flexibility of the frame unchanged.
It is a product with standard sizes that can be easily adapted to any frame and which finds physiological fixing to most of the screws on the floor.
By fixing on the latter it leaves the structure totally unchanged.
Easy to install on the chassis, they protect your kart from rubbing with the asphalt and curbs, preventing direct contact.
16 other products in the same category:
Front Stub Axle Wheel Spacer 10mm x 25 mm shaft GOLD
Stub axle wheel spacer 10mm x 25mm gold anodised
$2.95
Tax included
Steering Wheel 320mm Kartelli Pro Flat Top Flat Bottom...
$189.95
Tax included
MAXXIS SUPER SPORT FRONT TYRE 4.5-5/10.0 BLUES
$69.95
Tax included
GO KART 7.5 LITRE FUEL TANK FITS BETWEEN STEERING...
$65.95
Tax included
X30 Ignition Side Crank Shaft Half IAME Part No.:...
$445.00
Tax included
Rotax Power Valve Hose Spring Large Rotax Part No.:...
$6.50
Tax included
IAME RL CRANK PIN PART NO B-36451 18 X 47MM GENUINE
$44.50
Tax included
Rotax 18 Tooth Sprocket
$94.95
Tax included
Front Nassa Panel Number Plate Sticker Yellow
Front Nassa Panel Number Plate Sticker Yellow
$7.50
Tax included
10 tooth sprocket suit Vortex Mini Rok
$70.95
Tax included
Weld on frame components Bearing Hanger Brake Mount...
GO KART WELD ON FRAME COMPONENTS 2 x BEARING HANGER BRAKE MOUNT
$199.95
Tax included
ARROW X1 X2 X3 BRAKE DISC HUB BOLT SUIT FLOATER DISC
$4.95
Tax included
Thermostat 55c Stainless Steel
$32.95
Tax included
Tie Rod Rose Joint M8 PHS8L Left Hand Tread
Tie Rod Rose Joint M8 Left Hand Tread Suit older style tie rods
$15.00
Tax included
Accelerator Cable Round Braid Long
$24.95
Tax included
Kerb Rider 2pc Set - Universal
Thin to apply to the lower part of the frame in strategic points in order to protect it.
The choice to make these protections of a minimum thickness is due to the desire to maintain the flexibility of the frame unchanged.
It is a product with standard sizes that can be easily adapted to any frame and which finds physiological fixing to most of the screws on the floor.
By fixing on the latter it leaves the structure totally unchanged.
Easy to install on the chassis, they protect your kart from rubbing with the asphalt and curbs, preventing direct contact.