Magnesium Rims Bolt on 5 inch set of 4
whmkcad3s
$349.95
Tax included
Go Kart Rim Set Cadet
Set of 4 Kartelli Corse magnesium rims with valves, and 3 bead locks.
All 4 wheels are the same.
5 inch x 5 inch ( 125mm )
Bolt on via 3 bolts.
Suit: Cadet Kart
Note: These will not suit the current KA Bridgestone tyres as the front rims need to be 110mm and these are 125mm
Go Kart Tyre Tongs Tyre Tool Tire Tongs Kart tyre...
$159.95
Tax included
Bead Locks Kartelli Corse thumb tightening set of 12
$39.95
Tax included
Bead Locks set of 12 medium
$37.50
Tax included
Maxxis Sport Front 4.5-5/10 - 4 pc set for Cadet
$244.00
Tax included
Bead Locks set of 12 small
$24.95
Tax included
Wheel Nuts M8 Lock Flange Lock Pack of 12
$29.95
Tax included
Wheel Nuts Pack of 12 7075 Ultra Light Wheel Nuts
Wheel Nuts Kartelli Corse 7075 ultra light weight wheel nuts Pack of 12.
$59.95
Tax included
Wheel Nuts tubular Pack of 12
$37.50
Tax included
Bead Locks O-Ring set of 12 suits all styles of Bead...
$14.95
Tax included
16 other products in the same category:
Aim Mychron Extension Cable Temp extension cables -...
$100.00
Tax included
GO KART IAME KA100 MANIFOLD OPEN IAME ENGINE EXHAUST...
$92.95
Tax included
IAME EXHAUST MANIFOLD OPEN - X30 Part No. X30125370...
$92.95
Tax included
IAME Crank Shaft Nut and Spacer for 9T X30125573 and...
$24.95
Tax included
Rotax Air Box Complete including clamp and mounting...
$255.95
Tax included
Strike Clutch Yamaha S Long Shaft 10 Tooth
STRIKE LONG SHAFT CLUTCH KIT FOR YAMAHA KT100S ENGINES High Quality Strike Clutch to suit CLUBMAN / Yamaha KT100S.
$448.99
Tax included
Sniper Camber Caster swivel top suit 8mm king pins
$4.95
Tax included
IAME X30 / KA100 Clutch Nut 27mm Left Hand Thread...
$18.00
Tax included
IAME MAIN SEAL 22 x 35 x 7 IAME Part No.:...
$17.95
Tax included
Rotax Main Jet 158 Rotax Part No.: MJ158
Rotax Main Jet 158 Rotax Part No.: MJ158
$5.95
Tax included
MAXXIS CADET KA FRONT
$61.95
Tax included
Digital Tyre Gauge - PRO - Camozzi - WITH CARRY CASE -...
$198.95
Tax included
Rear Hub Set Suit 40mm Axle 90mm long Gold Anodised
$119.00
Tax included
Stub Axle Bearing Spacer 10mm ID x 32mm Long
Stub Axle Bearing Spacer 8mm ID x 26.5 mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
$3.49
Tax included
Yamaha J Restrictor J2 No Gasketes
$49.95
Tax included
Go Kart Rim Set Cadet
Set of 4 Kartelli Corse magnesium rims with valves, and 3 bead locks.
All 4 wheels are the same.
5 inch x 5 inch ( 125mm )
Bolt on via 3 bolts.
Suit: Cadet Kart
Note: These will not suit the current KA Bridgestone tyres as the front rims need to be 110mm and these are 125mm