Magnesium Rims CADET Bearing Front 5 inch set of 4
whmkcadbs
$349.95
Tax included
Go Kart Rim Set Cadet
Set of 4 Kartelli Corse magnesium rims with valves, and 3 bead locks.
2 - 5 inch x 5 inch ( 125mm ) Bearing Front 17mm
2 - 5 inch x 5 inch ( 125mm ) Bolt on via 3 bolts.
Suit: Cadet Kart
Note: These will not suit the current KA Maxxis tyres as the front rims need to be 110mm and these are 125mm
Go Kart Tyre Tongs Tyre Tool Tire Tongs Kart tyre...
$159.95
Tax included
Bead Locks Kartelli Corse thumb tightening set of 12
$39.95
Tax included
Bead Locks set of 12 medium
$37.50
Tax included
Maxxis Sport Front 4.5-5/10 - 4 pc set for Cadet
$244.00
Tax included
Bead Locks set of 12 small
$24.95
Tax included
Wheel Nuts M8 Lock Flange Lock Pack of 12
$29.95
Tax included
Wheel Nuts Pack of 12 7075 Ultra Light Wheel Nuts
Wheel Nuts Kartelli Corse 7075 ultra light weight wheel nuts Pack of 12.
$59.95
Tax included
Wheel Nuts tubular Pack of 12
$37.50
Tax included
Bead Locks O-Ring set of 12 suits all styles of Bead...
$14.95
Tax included
16 other products in the same category:
Camber Caster Senzo Kit - Dot 1 OTK 22mm x 10mm
$97.95
Tax included
IAME X30 Geniune Clutch Drum KA100 IAME Part...
$114.95
Tax included
Vortex MiniRok Main Jet - 92
$5.95
Tax included
Rear Crash Bar Mounting Rubber Bolts 28mm - Long
$54.95
Tax included
OTK Brake Pad - BSD -EV0082.G4KIT - Set of 2
$104.95
Tax included
Universal Chain Guard Black
$16.95
Tax included
Vortex MiniRok Main Jet - 97
$5.95
Tax included
Water Pump Axle Pulley 40mm Black Plastic
Water Pump Axle Pulley 40mm Black Plastic
$34.95
Tax included
Rotax Balance Shaft Rotax Part No.: 237948
Rotax Balance Shaft Rotax Part No.: 237948
$95.95
Tax included
Aim Mychron Sensors CHT Sensor - Short
$165.00
Tax included
Chain Measuring Ruler
$26.95
Tax included
Bearing 35mm x 72mm SB207zz
$21.95
Tax included
Magnesium Rim Rear 6 Inch x 190mm Kartelli Corse EACH
$109.95
Tax included
Brake Fitting 90 Degree Fitting Normal Type
90 Degree Fitting Normal Type NORMAL L PIECE UNION 1/8 - 6/4mm
$8.00
Tax included
Water Temp Gauge DIGITAL H2O TEMP Unit 0-80 Degrees C
$104.95
Tax included
Rotax Little End Cage or Clutch Bearing Rotax Part...
$46.95
Tax included
Go Kart Rim Set Cadet
Set of 4 Kartelli Corse magnesium rims with valves, and 3 bead locks.
2 - 5 inch x 5 inch ( 125mm ) Bearing Front 17mm
2 - 5 inch x 5 inch ( 125mm ) Bolt on via 3 bolts.
Suit: Cadet Kart
Note: These will not suit the current KA Maxxis tyres as the front rims need to be 110mm and these are 125mm