IAME RL Leopard Clutch Holder Tool
tlclutchholder
$39.95
Tax included
IAME RL Leopard Clutch holder tool
Clutch holder tool for tightening or loosening the 24mm left hand thread clutch nut.
Also holds the clutch when using the clutch puller tool.
16 other products in the same category:
Kart Clutch K100S Long Shaft - Red Clutch to suit Long...
$339.95
Tax included
Hubs Rear 30mm x 90mm Gold Set
Hubs Rear 30mm x 90mm Set Black If you buy a set of hubs wheel nuts are included 6mm keyway
$105.95
Tax included
Sniper Camber Caster Adjuster 1pc sold as each suit...
Sniper Camber Caster Adjuster 1pc sold as each suit 10mm King Pin
$64.95
Tax included
MAGNESIUM WET WEATHER RIM SET - Bearing Fronts
$329.95
Tax included
CYLINDER GASKET 4/10 -TOP / X30 / KA100
CYLINDER GASKET 4/10 -TOP / X30 / KA100 Part No. : EBP-125045 Pic Item Number : 11 Group Heading : HEAD AND CYLINDER
$6.20
Tax included
Brake Disc OTK Compatible 206mm x 16mm Part No....
$179.95
Tax included
Kart Axle 40mm x 1020mm - Super Soft to Super Hard -...
$198.95
Tax included
KA100 COPPER HEAD GASKET 0.10
COPPER HEAD GASKET 0.10 Part No. : IAA-40200-0.10 Pic Item Number : 10 Group Heading : HEAD AND CYLINDER
$6.20
Tax included
X30 Drive Side Crank Shaft half IAME Part No.:...
X30 Drive side crank shaft half IAME Part No.: X30125385 Item No. on Diagram : 65
$419.95
Tax included
Wheel Weights Stick On 3 pack
Stick on wheel weights Normally the weight of the valve is enough to make your wheel out of balance. Use these stick on wheel weights to balance your wheels.
$9.95
Tax included
RED CLUTCH SPROCKET 11 TOOTH LONG SHAFT KT100S or KT100J
$54.40
Tax included
Rotax Airbox Case Top Rotax Part No.: 225025
Rotax Airbox Case - Top - 2007 Type Rotax Part No.: 225025
$39.95
Tax included
Carburettor Tillotson Airbox Adaptor
Alloy Airbox Adaptor Suit Tillotson Cheetah
$14.95
Tax included
Spring Exhaust Mount Quick Release
$4.95
Tax included
Tie Rod 235mm Black
Black Tie Rod 235 mm Suits most model and brands of karts Suits M8 left and right hand rod ends sold separately
$16.45
Tax included
IAME RL Leopard Clutch holder tool
Clutch holder tool for tightening or loosening the 24mm left hand thread clutch nut.
Also holds the clutch when using the clutch puller tool.