Kart Parts There are 275 products.
Spare Temp Probe to suit water temp gauge
Spare Temp Probe to suit water temp gauge
chassis plug 30mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
Stub Axle Bearing Spacer 10mm ID x 17.9 mm Long
Stub Axle Bearing Spacer 8mm ID x 17.9 mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Ignition Timing Support Tool
Floor Tray Rubber Washer M6 - Black
Battery Powered Fluid Pump 10 Litres per minute
GO KART FUEL PUMP BATTERY POWERED 10 Litres per minute Fits 32mm opening 2 x D Cells ( not included )
Washer Counter Sunk Alloy Black Anodised M8 ( Large )
Washer Counter Sunk Alloy Black Anodised Large. Used for rear bearing hangers.
Bead Locks set of 12 small
Engine Tensioner Bolt M10 x 100mm
Pad Spring and Bolt
chassis plug 32mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
Stub Axle Bearing Spacer 10mm ID x 22mm Long
Stub Axle Bearing Spacer 8mm ID x 23mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles