Kart Parts There are 241 products.
Caliper Spacer Brake Shim 1mm Thick for rear brake...
Brake Fitting 90 Degree Fitting Speedy Type
90 Degree Fitting Speedy Type Brake Fitting L Piece 1/8 - 6mm Suit : Brake Line / Nylon Brake Pipe 4x6mm 80 BAR
Rose Joint M6 standard Left Hand thread Suit: Brake Rod
Rose Joint M6 standard Left Hand thread Suit: Brake Rod
CRG Ven 5 Brake Pads AFS.01745 - RED Compound -...
Fits the CRG Ven 05 system Type : Medium Also suitable for karts running the Maranello, Lewis Hamilton, Zanardi, DR Kart, Talko or GP systems
Ride Spacer Washers 3 Pack M8 4mm thick
Ride Height Spacers M8 4mm thick Install on either side of the stub axle on the king pin bolt pack of 3
M10 Nyloc Nut Suit M10 Steering Column and M10 Kingpin
M10 Nyloc Nut Suit M10 Steering Column and M10 Kingpin
Nippon Denso Irdium Race Spark Plug IW27
Nippon Denso Irdium Race Spark Plug IW27 Suit Rotax All models IAME and Cheetah on cold days less than 25 degrees
Stub Axle Bearing Spacer 8mm ID x 23mm Long
Stub Axle Bearing Spacer 8mm ID x 23mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
