Kart Parts There are 191 products.
Air Box Internal Filter RED NOTE: NOT IAME BRANDED
Internal air filter and rubber RED type Cheetah and X30 if your not racing AKA
The Brake Clevis Clevis Clip Red M6 Right Hand Thread
Red Anodised Clevis and Clip Pin for the end of the brake rod to attach to the Brake Master Cylinder. M6 Right Hand Thread M6 Standard Right Hand Thread
Accelerator Cable Round Braid
Kartelli Corse smooth running short accelerator cable with round lug Inner Cable 1260mm Braid Outer Cable 680mm
Ride Spacer Washers 3 Pack M8 4mm thick
Ride Height Spacers M8 4mm thick Install on either side of the stub axle on the king pin bolt pack of 3
Plastic Spacer Washer M6
Plastic Spacer Washer M6 Normally used on front crash bars as a bush.
Spark Plug NGK BR8ES Standard Plug Suit Run In.
Spark Plug NGK B8ES Basic spark plug. Good for running your engine in. Suit Clubman J and a good run in plug.
Spark Plug NGK BPR8HIX Iridium Race Plug Suit Comer SW80
Spark Plug NGK BPR8HIX Iridium Race Plug
Tie Rod 275mm Black
Black Tie Rod 275 mm Suits most model and brands of karts Suits M8 left and right hand rod ends sold separately
Washer Counter Sunk Alloy Gold Anodised M8 ( Large )
Washer Counter Sunk Alloy Gold Anodised Large. Used for rear bearing hangers
WHEEL RIM TYRE VALVE
WHEEL RIM TYRE VALVE with CAP TO SUIT MAGNESIUM AND ALLOY