Kart Parts There are 216 products.
Side Pod Bar Suit most Karts - Left 500mm Centres 20mm...
Side Pod Bar Left NOTE: will fit Arrow and Monaco that have 20mm thick bars SOME are only 19mm.. Check before order Suit: Most Senior Karts
Bearing 50mm Axle 80mm OD
Cable Adjuster
Cable Adjuster Suits both ends of the accelerator cable carburettor as well as the chassis
Rear Crash Bar Bush
This is the bush that is inserted in the frame .This part wears over time so it should be replaced on a regular basis.
Engine Mount Nut each
Engine mount manifold nuts. M10 thread, the nuts are captive inside the engine mount. Sold as each.
NOSECONE SENIOR KG FP7 BLACK
Side Pod SQ Cadet Both
SQ Side Pods both (left and right) Suit Midget Rookie or Cadet kart
Stub Axle Bearing Spacer 8mm ID x 23mm Long
Stub Axle Bearing Spacer 8mm ID x 23mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Blanking Plug For Temperature Sensor Hole
Blanking Plug for temperature sensor hole with copper washer thread M10 x 1 ( standard fitting )