Kart Parts There are 239 products.
Brake Disc 210mm x 12mm twin groved not drilled
Clutch Drum and 11 Tooth Sprocket suit IAME X30 KA100...
Clutch Drum suit IAME X30 , KA100 , RL Leopard or Cheetah 11 Tooth 4 bolt sprocket
Cheetah Flywheel Woodruff Key Ignition side
Cheetah Flywheel Woodruff Key Ignition side. This is slightly thinner than the clutch side woodruff key
Cheetah Piston Piston Ring Pin and clips
Cheetah Engine Oversize Piston NO BEARING INCLUDED
Ride Spacer Washers 3 Pack M8 4mm thick
Ride Height Spacers M8 4mm thick Install on either side of the stub axle on the king pin bolt pack of 3
Engine Mount Nut each
Engine mount manifold nuts. M10 thread, the nuts are captive inside the engine mount. Sold as each.
Stub Axle Bearing Spacer 10mm ID x 22mm Long
Stub Axle Bearing Spacer 8mm ID x 23mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Tie Rod Adjustable Black single
Fully Adjust length tie rod Fully compatible with the Arrow Tie Rods From 210mm to 290mm
Inline Thermostat Kartelli Corse 70 degree
KARTELLI CORSE - INLINE THERMOSTAT 70 DEGREE C Suits all water-cooled engines
