Kart Parts There are 180 products.
The Brake Clevis Clevis Clip Red M6 Right Hand Thread
Red Anodised Clevis and Clip Pin for the end of the brake rod to attach to the Brake Master Cylinder. M6 Right Hand Thread M6 Standard Right Hand Thread
IAME X30 Gaskets Kit IAME Part No.: X30125991
Exhaust Flex Silicone Cover suit 100cc and 125cc...
KARTELLI CORSE EXHAUST FLEX SEALING BANDAGE Suits
Rear Hub Suit 40mm Axle 90mm long Black Anodised
Rear Hub Suit 40mm Axle 90mm long Black Anodised
Front Mini Hub Black 95 x 25mm Stub Axles
Front 95mm Hub Large Black Suit 25mm Stub Axles
Engine Mount Nut each
Engine mount manifold nuts. M10 thread, the nuts are captive inside the engine mount. Sold as each.
Stub Axle Bearing Spacer 10mm ID x 22mm Long
Stub Axle Bearing Spacer 8mm ID x 23mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Blanking Plug For Temperature Sensor Hole
Blanking Plug for temperature sensor hole with copper washer thread M10 x 1 ( standard fitting )
Wheel nut front stub axle spindle M14 nylock EACH
Wheel nut front stub axle spindle M14 nylock front wheel nut. EACH Regular replacement is recommended as nylocks wear from regular tightening
Brake Safety Cable Clevis type 650mm
