Kart Parts There are 138 products.
Air Box Internal Filter RED NOTE: NOT IAME BRANDED
Internal air filter and rubber RED type Cheetah and X30 if your not racing AKA
The Brake Clevis Clevis Clip Red M6 Right Hand Thread
Red Anodised Clevis and Clip Pin for the end of the brake rod to attach to the Brake Master Cylinder. M6 Right Hand Thread M6 Standard Right Hand Thread
Accelerator Cable Round Braid
Kartelli Corse smooth running short accelerator cable with round lug Inner Cable 1260mm Braid Outer Cable 680mm
Ride Spacer Washers 3 Pack M8 4mm thick
Ride Height Spacers M8 4mm thick Install on either side of the stub axle on the king pin bolt pack of 3
M10 Nyloc Nut Suit M10 Steering Column and M10 Kingpin
M10 Nyloc Nut Suit M10 Steering Column and M10 Kingpin
Tie Rod Adjustable Kit with rod ends Black single kit
Washer Counter Sunk Alloy Black Anodised M8 ( Large )
Washer Counter Sunk Alloy Black Anodised Large. Used for rear bearing hangers.
Extended Wheel Nut With Flange 8mm
30mm Axle Collar 2 pc split type each
Brake Rod Clevis Pin 6mm
The Clevis Pin for the end of the brake rod to attach to the Brake Master Cylinder. 6mm
Carburettor Cable Clamp
