Kart Parts There are 229 products.
Pad Spring and Bolt
chassis plug 30mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
X30 Seal Kit 3 pc IAME Part No.: X30125880 IAME...
X30 Seal Kit 3 pc IAME Part No.: X30125425A x 2 IAME Part No.: X30125880...
IAME X30 and RL Leopard CDI ignition box. IAME...
HIGH TENSION LEAD MOUNTING SPRING
X30 Countershaft SUPPORT IAME Part No.: A-60870-C
X30 Countershaft SUPPORT IAME Part No.: A-60870-C Item No. on Diagram : 501...
IAME X30 Gaskets Kit IAME Part No.: X30125991
Plastic Spacer Washer M6
Plastic Spacer Washer M6 Normally used on front crash bars as a bush.
Rear Crash Bar Mounting Bolt Short
Starter Motor Bendix Gear Starter Pinion Gear
Starter Motor to suit Cheetah, Rotax, PRD , Vortex, IAME , X30, KA100, Leopard and many other TAG kart engines.
Blanking Plug For Temperature Sensor Hole
Blanking Plug for temperature sensor hole with copper washer thread M10 x 1 ( standard fitting )
Bead Locks Kartelli Corse thumb tightening set of 3
Set of 3 Kartelli Corse thumb bead locks easy to tighten, thumbtightening beadlocks. Suitable for Douglas, OTK, Kartelli Corse and most quality brand rims