Kart Parts There are 247 products.
Bearing 50mm x 90 Axle Sealed. These are heavy duty...
Bearing 50mm x 90 Axle Sealed. These are heavy duty rubber lip seal bearings. Great for dirt or wet weather.
Brake Rod Clevis Pin 6mm
The Clevis Pin for the end of the brake rod to attach to the Brake Master Cylinder. 6mm
chassis plug 32mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
Bearing Hanger Black 50mm Axles
Bearing Hanger Black anodised alloy. Suit 50mm x 90mm setups
X30 Crank Seals IAME Part No.: X30125425A
X30 Crank Case Seal 25x40x7 FPJ EACH For both Ignition Side and Drive side IAME Part No.: X30125425A Item No. on Diagram : 62...
IAME KA100 CYLINDER HEAD REEDJET AUS
IAME KA100 CYLINDER HEAD REEDJET AUS Part No. : IAA-40100 Pic Item Number : 1
IAME KA100 and X30 Reed Block and Carburettor Gasket Kit
IAME KA100 and X30 Reed Block and Carburettor Gasket Kit
X30 Ignition Side Crank Shaft Half IAME Part No.:...
X30 Ignition Side Crank Half IAME Part No.: X30125390 Item No. on Diagram : 66 To Suit :...
Ride Spacer Washers 3 Pack M8 4mm thick
Ride Height Spacers M8 4mm thick Install on either side of the stub axle on the king pin bolt pack of 3
Tie Rod Rose Joint M8 PHS8L Left Hand Tread
Tie Rod Rose Joint M8 Left Hand Tread Suit older style tie rods
