Kart Parts There are 229 products.
Air Box Clamp
Carburettor Tillotson HL 334ab Gasket and Needle...
Brake Rod Clevis Pin 6mm
The Clevis Pin for the end of the brake rod to attach to the Brake Master Cylinder. 6mm
Accelerator Cable Round Braid
Kartelli Corse smooth running short accelerator cable with round lug Inner Cable 1260mm Braid Outer Cable 680mm
chassis plug 30mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
Honda GX 35 Pee Wee Engine Kit
Rotax Main Jet 180 Rotax Part No.: MJ180
Rotax Main Jet 180 Rotax Part No.: MJ180
Rotax Main Jet 172 Rotax Part No.: MJ172
Rotax Main Jet 172 Rotax Part No.: MJ172
Hose Set Blue Silicon suit most watercooled engines
Radiator Hose Set (2 long + 1 elbow) Blue Silicon suit most watercooled engines
Stub Axle Bearing Spacer 10mm ID x 22mm Long
Stub Axle Bearing Spacer 8mm ID x 23mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Kartelli Pop Off Gauge Adaptor
Inlet Lever Height Gauge For: Walbro Carburetor Tillotson Carburetor Tryton Carburetor and similar that have a metering lever arm ...
Water Pump Bracket
This water pump bracket goes on a mounting clamp to be positioned where ever your chassis will allow it.
