Kart Parts There are 154 products.
The Brake Clevis Clevis Clip Red M6 Right Hand Thread
Red Anodised Clevis and Clip Pin for the end of the brake rod to attach to the Brake Master Cylinder. M6 Right Hand Thread M6 Standard Right Hand Thread
Honda GX35 Clutch Drum Includes 219 Pitch 8 Tooth...
Honda GX35 Clutch Drum includes 7 Tooth Sprocket
Ride Spacer Washers 3 Pack M8 4mm thick
Ride Height Spacers M8 4mm thick Install on either side of the stub axle on the king pin bolt pack of 3
M8 Fitting for Pulse Line Fuel Line. Suit Honda...
M8 Fitting for Pulse Line Fuel Line uses standard M8 tread Can be fitted to Honda GX120 GX160 GX200
Rear Crash Bar Mounting Bolt Short
Thermostat 70c Stainless Steel
Stainless steel thermostat mechanism as found in the inline thermostat.
Water Pump Bracket
This water pump bracket goes on a mounting clamp to be positioned where ever your chassis will allow it.
WHEEL RIM TYRE VALVE
WHEEL RIM TYRE VALVE with CAP TO SUIT MAGNESIUM AND ALLOY
Brake Rod Clevis Pin 6mm
The Clevis Pin for the end of the brake rod to attach to the Brake Master Cylinder. 6mm
ROTAX RAD BRACKET 651690
Fuel Line T connection
Fuel Line Y connection Suit fuel line ID 5mm OD 9mm ( standard kart fuel line )