Kart Parts There are 139 products.
The Brake Clevis Clevis Clip Red M6 Right Hand Thread
Red Anodised Clevis and Clip Pin for the end of the brake rod to attach to the Brake Master Cylinder. M6 Right Hand Thread M6 Standard Right Hand Thread
Ride Spacer Washers 3 Pack M8 4mm thick
Ride Height Spacers M8 4mm thick Install on either side of the stub axle on the king pin bolt pack of 3
Pedal Return Spring
Nippon Denso Irdium Race Spark Plug IW27
Nippon Denso Irdium Race Spark Plug IW27 Suit Rotax All models IAME and Cheetah on cold days less than 25 degrees
Stub Axle Bearing Spacer 10mm ID x 26.5mm Long
Stub Axle Bearing Spacer 8mm ID x 26.5 mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
NGK Spark Plug Lead Splicer
Bead Locks Kartelli Corse thumb tightening set of 12
Fuel Line Y connection
Fuel Line Y connection Suit fuel line ID 5mm OD 9mm ( standard kart fuel line )
Spark Plug Cap NGK LB05EMH Red
Brake Rod Clevis Pin 6mm
The Clevis Pin for the end of the brake rod to attach to the Brake Master Cylinder. 6mm
Spark Plug NGK B10EG replaces B10EGV
NGK B10EG Spark Plug Competition Grade Spark Plug Suits Racing Replaces B10EGV