Kart Parts There are 189 products.
Air Box Internal Filter RED NOTE: NOT IAME BRANDED
Internal air filter and rubber RED type Cheetah and X30 if your not racing AKA
The Brake Clevis Clevis Clip Red M6 Right Hand Thread
Red Anodised Clevis and Clip Pin for the end of the brake rod to attach to the Brake Master Cylinder. M6 Right Hand Thread M6 Standard Right Hand Thread
Accelerator Cable Lug Suit Cheetah, J, Clubman,...
Rotax Exhaust Socket Gasket Rotax Part No.: 250271
Rotax Exhaust Socket Gasket Rotax Part No.: 250271
ROTAX 125 EXHAUST SPRING - 66mm - NON EVO
Ride Spacer Washers 3 Pack M8 4mm thick
Ride Height Spacers M8 4mm thick Install on either side of the stub axle on the king pin bolt pack of 3
Kartelli Boots Motor Sport Boots - Made especially for...
Stub Axle Bearing Spacer 10mm ID x 17.9 mm Long
Stub Axle Bearing Spacer 8mm ID x 17.9 mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Tie Rod Adjustable Black single
Fully Adjust length tie rod Fully compatible with the Arrow Tie Rods From 210mm to 290mm
Front Stub Axle Wheel Spacer 10mm x 17mm GOLD
Stub axle wheel spacer 10mm x 17mm gold anodised
Bearing 40mm x 80mm zz
Bearing 40mm x 80mm zz rear axle bearing Suit most karts ID ( inside diameter ) = 40 mm OD ( outside diameter ) = 80 mm
