Kart Parts There are 184 products.
Bearing 50mm x 90 Axle Sealed. These are heavy duty...
Bearing 50mm x 90 Axle Sealed. These are heavy duty rubber lip seal bearings. Great for dirt or wet weather.
Brake Rod Clevis Pin 6mm
The Clevis Pin for the end of the brake rod to attach to the Brake Master Cylinder. 6mm
Bearing Hanger Black 50mm Axles
Bearing Hanger Black anodised alloy. Suit 50mm x 90mm setups
IAME X30 Gaskets Kit IAME Part No.: X30125991
Bearing Hanger Gold 50mm Axles suit OD 80mm bearings
Restrictor Cheetah Includes 2 x Exhaust Gaskets
AKA approve and homologated Cheetah Exhaust Restrictor. This restrictor reduces the horsepower of the Cheetah to a level to race in the AKA Class of TAG/R
7 Tooth 219 Pitch Sprocket to suit Honda GX35
Floor Tray Rubber Washer M6 - Black
Wheel nut front stub axle spindle M14 nylock EACH
Wheel nut front stub axle spindle M14 nylock front wheel nut. EACH Regular replacement is recommended as nylocks wear from regular tightening
Bead Locks O-Ring set of 12 suits all styles of Bead...
Bearing 50mm Axle 90mm OD
The is a 50mm rear axle bearing Suit most karts ID ( inside diameter ) = 50 mm OD ( outside diameter )
Rose Joint M6 standard Left Hand thread Suit: Brake Rod
Rose Joint M6 standard Left Hand thread Suit: Brake Rod
