Kart Parts There are 231 products.
Plastic Spacer Washer M6
Plastic Spacer Washer M6 Normally used on front crash bars as a bush.
Stub Axle Bearing Spacer 8mm ID x 23mm Long
Stub Axle Bearing Spacer 8mm ID x 23mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Seat Washer M8 Counter Sunk Alloy Black Anodised -...
Seat Washer Counter Sunk Alloy Black Anodised
Wheel Nuts tubular Pack of 12
chassis plug 30mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
Engine Mount
Engine Mount to suit 32mm frame PLEASE NOTE: Requires Engine Mount NUT to be inserted in the mount see below
Seat Washers Counter Sunk Alloy Black Anodised Pack...
Blanking Plug For Temperature Sensor Hole
Blanking Plug for temperature sensor hole with copper washer thread M10 x 1 ( standard fitting )
Chain Guard Mounting Bracket - long
Engine Mount Slider Flat Suit 28mm 30mm and 32mm
Pad Spring and Bolt
This is the little spring and bolt that screws into the brake pad. It releases the pad from the disc when you take your foot off the brake.