Kart Parts There are 158 products.
Cheetah Crank Shaft Nut
17 mm nut, 2 per Cheetah engine 1 for the clutch drum, 1 for the flywheel. A small dot of thread glue is recommended during replacement
Cheetah Clutch Drum also suit Leopard
Cheetah Clutch Drum also suit Leopard RL Leopard NOT X30 ( we sell the X30 drum as well )
Reed Block
Alloy Cheetah Engine Reed Block. Also suits PRD Fireball and IAME RL Leopard (not X30).
Front Mini Hub Set Black Medium Suit 17mm x 55mm stub...
Engine Mount 30mm x 125mm with 2 x 125mm mount clamp...
Engine Mount 30mm x 125mm with 2 x 125mm mount clamp suit older Tony Kart and Mike Wilson
Engine Mount Clamp Billet ultra strong
Engine Mount Clamp extruded billtet with a multifit profile to suit 28, 30 or 32 mm frames.
Starter Motor Gear Box Cap
Starter motor gearbox black plastic end cap <br> Can get smashed up if you break a chain.
50mm Rear Axle Hub Spacers
Front Mini Hub Black 55mm Suit 25mm Stub Axles
Front Mini Hub Medium Black Suit 25mm Stub Axles
Clutch Drum and 11 Tooth Sprocket suit IAME X30 KA100...
Clutch Drum suit IAME X30 , KA100 , RL Leopard or Cheetah 11 Tooth 4 bolt sprocket
Teflon Crank Case Seal
Teflon Race Seal (sold individually)
