Kart Parts There are 250 products.
Caster Adjusters M10 suit 22mm hole in chassis
Engine Mount OTK Magnesium 92 x 30 mm EV0038.D0F
Engine Mount OTK Magnesium Inclined 92 x 30 mm OTK Part No. EV0038.D0F Inclined Suit Rotax , IAME, Vortex e
Starter Motor Bendix Gear Starter Pinion Gear
Starter Motor to suit Cheetah, Rotax, PRD , Vortex, IAME , X30, KA100, Leopard and many other TAG kart engines.
Rotax Jet Pack Carburettor Jet Holder
Cheetah Crank Shaft Nut
17 mm nut, 2 per Cheetah engine 1 for the clutch drum, 1 for the flywheel. A small dot of thread glue is recommended during replacement
Clutch Drum suit IAME X30 or Cheetah
Clutch Drum suit IAME X30 or Cheetah 4 bolt sprocket
Engine Mount 32mm x 125mm with 2 x 125mm mount clamp...
Engine Mount 32mm x 125mm with 2 x 125mm mount clamp suit older Tony Kart and Mike Wilson
Engine Mount Slider Suit 28mm 30mm and 32mm
Engine Mount Torque Plate
This is a 10mm solid steel plate that you can place between the engine and the engine mount The makes the engine ROCK SOLID and reduces any crank case flex.
Starter Motor Billet Support Mount GOLD
Starter Motor Billet Support Mount Gold. Compatible with Cheetah and Iame Leopard
Air Box Internal Filter RED NOTE: NOT IAME BRANDED
Internal air filter and rubber RED type Cheetah and X30 if your not racing AKA