Kart Parts There are 292 products.
Exhaust Header IAME RL Leopard or Cheetah
Exhaust Header Exhaust Header IAME RL Leopard or Cheetah Aftermarket Kartelli Corse Header
Cheetah Piston Ring
Cheetah Engine piston ring one size fits all. Ring end gap should be 0.4 to 0.45
Cheetah Piston Piston Ring Pin and clips
Cheetah Engine Oversize Piston NO BEARING INCLUDED
Teflon Crank Case Seal
Teflon Race Seal (sold individually)
Hose Fiting suit IAME RL Leopard or SQ Cheetah
Brass hose fitting with copper washer gasket, as used in the cylinder for water inlet and the thermostat cover for outlet in the head. suit IAME RL Leopard or SQ Cheetah
Engine Mount 32mm x 125mm with 2 x 125mm mount clamp...
Engine Mount 32mm x 125mm with 2 x 125mm mount clamp suit older Tony Kart and Mike Wilson
Engine Mount Clamp 30mm x 125mm
Engine Mount Clamp 30mm x 125mm This is a SPEICAL 125mm wide mount clamp
IAME X30 RL Leopard KA100 Air Box Socorem - Blue
IAME X30 RL Leopard KA100 Air Box Socorem FMK 952/98 Highly recommend getting the internal air filter
Engine Mount Slider Suit 28mm 30mm and 32mm
Engine Tensioner Bolt M10 x 100mm
Main Bearings 6205 bearings
Main Bearings 6205 bearings. Suit CHEETAH and RL Leopard Sold as EACH
