Kart Parts There are 132 products.
Carburettor Cable Clamp
Starter Motor Armature Suit TAG eng. Rotax IAME...
Starter Motor Armature SUIT TAG engines. Rotax IAME CHEETAH Rok ( except Fireball ) Even if you buy a new starter motor, rebuild your old one and keep it as a good spare. Also...
Spark Plug Hole Filler Plug
Spark Plug hole filler plug For when you remove the spark plug from the engine for storage or shipping. GRAB A FEW !!!!!
Stub Axle Bearing Spacer 8mm ID x 23mm Long
Stub Axle Bearing Spacer 8mm ID x 23mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Ignition Timing Support Tool
Bead Locks Kartelli Corse thumb tightening set of 3
Set of 3 Kartelli Corse thumb bead locks easy to tighten, thumbtightening beadlocks. Suitable for Douglas, OTK, Kartelli Corse and most quality brand rims
Wheel Nuts tubular Pack of 12
chassis plug 30mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
Starter Motor PRD ONLY
Starter Motor PRD ONLY For starter motor to suit Rotax, Cheetah, RL, X30, Mini Rok etc.. See below.