Kart Parts There are 253 products.
40mm Axle Collar 2 pc split type each
40mm Go Kart Axle Retaining Collar Guarantee to release your Engine Power. All keyway 8mm (so fit 6mm as well)
Front Wheel Bearing 25mm x 37mm 6805zz
Stub Axle Bearing suit 25mm stud axle 6805zz OD 37mm x ID 25mm x 7mm
Brake Pads Suit 4 Spot Brakes BLACK HARD
Brake Pads Suit 4 Spot Brakes BLACK HARD
chassis plug 30mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
IAME X30 RL Leopard Wiring Harness Includes Key and...
Engine Mount Nut each
Engine mount manifold nuts. M10 thread, the nuts are captive inside the engine mount. Sold as each.
Stub Axle Bearing Spacer 10mm ID x 26.5mm Long
Stub Axle Bearing Spacer 8mm ID x 26.5 mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Tie Rod Adjustable Kit with rod ends Black single kit
Blanking Plug For Temperature Sensor Hole
Blanking Plug for temperature sensor hole with copper washer thread M10 x 1 ( standard fitting )
Magnesium Rims Front and Rear Set Bolt on front rims
Front Stub Axle Wheel Spacer 5mm x 17 mm shaft BLACK
Alloy Front Rim 17mm Bearing 110mm CADET FRONT - KA only
Front alloy rim with bearings. Use bearing fronts if you are not running front mini hubs. Uses standard sized 17mm ID bearings SILVER