Kart Parts There are 130 products.
25mm Stub Bearing 6000zz OD 26mm x ID 10mm x 8mm
25mm Stub Bearing Model: 6000zz OD 26mm x ID 10mm x 8mm
Easitune Charger Plug Pack
Engine Mount 32mm x 125mm with 2 x 125mm mount clamp...
Engine Mount 32mm x 125mm with 2 x 125mm mount clamp suit older Tony Kart and Mike Wilson
Engine Mount Bolt M10 x 50mm
Tie Rod Rose Joint M8 PHS8L Left Hand Tread
Tie Rod Rose Joint M8 Left Hand Tread Suit older style tie rods
Stub Axle Bearing Spacer 8mm ID x 23mm Long
Stub Axle Bearing Spacer 8mm ID x 23mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Bearing 30mm Axle Sealed. These are heavy duty rubber...
Bearing 30mm Axle Sealed. These are heavy duty rubber lip seal bearings. Great for dirt or wet weather. ID = 30mm OD = 62mm SB206
25mm Stub Bearing 6000zz 4 pak OD 26mm x ID 10mm x 8mm
25mm Stub Bearing 4 pak Model: 6000zz OD 26mm x ID 10mm x 8mm
Little End Bearing IKO 14 x 18 x 16.5 Silver coated
Engine Mount Clamp 30mm x 125mm
Engine Mount Clamp 30mm x 125mm This is a SPEICAL 125mm wide mount clamp
Engine Mount Clamp Billet ultra strong
Engine Mount Clamp extruded billtet with a multifit profile to suit 28, 30 or 32 mm frames.