Kart Parts There are 292 products.
Brake Rod Clevis Pin 6mm
The Clevis Pin for the end of the brake rod to attach to the Brake Master Cylinder. 6mm
chassis plug 30mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
X30 Seal Kit 3 pc IAME Part No.: X30125880 IAME...
X30 Seal Kit 3 pc IAME Part No.: X30125425A x 2 IAME Part No.: X30125880...
IAME X30 and RL Leopard CDI ignition box. IAME...
HIGH TENSION LEAD MOUNTING SPRING
Stator and flywheel kit to suit IAME X30 NOTE Will not...
X30 / KA100 Reed Block GASKET IAME Part No.: X30125810
X30 Crankc/mani GASKET IAME Part No.: X30125810 Item No. on Diagram : 170 To Suit : X30 INLET
Plastic Spacer Washer M6
Plastic Spacer Washer M6 Normally used on front crash bars as a bush.
Stub Axle Bearing Spacer 10mm ID x 17.9 mm Long
Stub Axle Bearing Spacer 8mm ID x 17.9 mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Starter Motor Repair Kit
Number 2 decal Large black sticker
Kart number decal Black large number 2 suit nassa panel or number plate. Made in three layers for easy application from 3M ScotchCal. AKA approved font and size.