Kart Parts There are 226 products.
Nassa Panel Top Brackets 2 off A pair
Cheetah Crank Shaft Nut
17 mm nut, 2 per Cheetah engine 1 for the clutch drum, 1 for the flywheel. A small dot of thread glue is recommended during replacement
chassis plug 30mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
Clutch Drum and 10 Tooth Sprocket suit IAME X30 KA100...
Clutch Drum suit IAME X30 , KA100 , RL Leopard or Cheetah 10 Tooth 4 bolt sprocket
Pedal Grip Black
Engine Mount Nut each
Engine mount manifold nuts. M10 thread, the nuts are captive inside the engine mount. Sold as each.
Restrictor Cheetah Includes 2 x Exhaust Gaskets
AKA approve and homologated Cheetah Exhaust Restrictor. This restrictor reduces the horsepower of the Cheetah to a level to race in the AKA Class of TAG/R
Stub Axle Bearing Spacer 10mm ID x 22mm Long
Stub Axle Bearing Spacer 8mm ID x 23mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Starter Motor Repair Kit
Number 2 decal Small black sticker Suit side pods
Kart number decal black small number 2 suit sidepods. Made in three layers for easy application from 3M ScotchCal. AKA approved font and size.
Number 9 Decal Large Black Carbon Fibre Style Sticker
Kart Number Decal Black Large Number 9 Suit nassa panel or number plate. Easy application of Carbon Fibre Style vinyl. KA approved font and size.
Number 2 Black Large on Yellow background Numbers
Number 2 Black Large on Yellow background