Kart Parts There are 211 products.
Nassa Panel Top Brackets 2 off A pair
Cheetah Crank Shaft Nut
17 mm nut, 2 per Cheetah engine 1 for the clutch drum, 1 for the flywheel. A small dot of thread glue is recommended during replacement
chassis plug 30mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
Clutch Drum and 10 Tooth Sprocket suit IAME X30 KA100...
Clutch Drum suit IAME X30 , KA100 , RL Leopard or Cheetah 10 Tooth 4 bolt sprocket
Number 7 decal Small black sticker Suit side pods
Kart number decal black small number 7 suit sidepods. Made in three layers for easy application from 3M ScotchCal. AKA approved font and size.
Rear Crash Bar Mounting Bolt long
Rear Crash Bar Mounting Bolt long suit plastic rear crash bar
Stub Axle Bearing Spacer 10mm ID x 17.9 mm Long
Stub Axle Bearing Spacer 8mm ID x 17.9 mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Starter Motor Billet Support Mount GOLD
Starter Motor Billet Support Mount Gold. Compatible with Cheetah and Iame Leopard
Number 2 decal Large black sticker
Kart number decal Black large number 2 suit nassa panel or number plate. Made in three layers for easy application from 3M ScotchCal. AKA approved font and size.
Number 8 decal Small red sticker Suit side pods
Kart number decal red small number 8 suit side pods. Made in three layers for easy application from 3M ScotchCal. AKA approved font and size.
Number 1 decal Small red sticker Suit side pods
Kart number decal red small number 1 suit side pods. Made in three layers for easy application from 3M ScotchCal. AKA approved font and size.
Front Stub Axle Wheel Spacer 10mm x 17mm GOLD
Stub axle wheel spacer 10mm x 17mm gold anodised
